DX53D+Z Galvalume Coil

Advantage:

Strong corrosion resistance, 3 times that of galvanized steel sheet.
The density of 55% aluminum is smaller than the density of zinc. When the weight is the same and the thickness of the plating layer is the same, the area of the galvalume steel sheet is 3% or larger than that of the galvanized steel sheet.

Specification

Surface Finish

DX53D+Z Galvalume Coil Coating Layer

· Anti-Finger printing ,Chromated, Oiled/ non-oiled
· Alu-Zinc Plating Layer
· Cold Rolled Steel Sheet

 
DX53D+Z Galvalume Coil Features

Thermal Reflection:
People use it as material for heat-insulation for its thermal reflectivity as high as twice the galvanized steel sheet.

Heat-resistance:
The aluzinc steel sheet could bear above 300℃high temperature with its good performance in heat-resistance, quite similar to the aluminized steel sheet’s performance in oxidation-resistance under high temperature. It is often used for chimney pipe, oven, illominator, and fluorescent lamp cover.

Corrosive-resistance performance:
The essential of galvalume steel coil’s corrosive-resistance lies at aluminium’s protective property. Once the zinc come under abrasion, the aluminium would form a layer of densified oxidized aluminium, preventing the interior from further corrosion.

Economical:
The density of 55%AL-Zn is smaller than Zn, therefore, with the same weight and thickness of coating, the galvalume steel sheet is 3% larger in area than that of galvanized steel sheet.

Easily painted:
There is perfect adhesiveness between galvalume sheet and paint, saving the process of pre-treatment and weathering for painting work.

The coating material on the galvalume steel sheet is outstanding in its adhesiveness, which could be directly tarring on the advertising board and commonly used board with no pre-treatment such as weathering process.

The galvalume steel sheet’s surface is luxury in silver colored appearance.
Galvalume steel sheet and galvanized steel sheet are similar in performance of processability and painting.

The Difference Between Galvanized And Galvalume:
The primary difference lies at its coating layer. For the galvanized sheet, a layer of zinc material is averagely distributed on the surface of galvanized sheet, playing as a positive sheet protective to the base metal, in another word, zinc works as substitute for corrosive-proof protecting the base metal until it is torn off.

While the galvalume sheet’s surface is a coating layer consisting of 55% aluminium, 43.5% zinc and other few elements, which appears a honeycomb structure under microscopic observation. Aluminium honeycomb wraps the zinc.Under such circustances, even though the coating of galvalume also plays its protective role as positive sheet, however, such protection decrease sharply due to declining content of zinc and no easily electrolysis when zinc wrapped by aluminium.

Therefore, once the galvalume sheet is cut open, the verge of cut would be generally losing its protector and quickly go rusting. So we should cut as less as possible, once cutting happen, use anti-rusting paint or zinc-rich paint for protecting the verge, extending its lifespan.